Connolly leather in classic cars: what Vaumol was
For much of the twentieth century, opening the door of a Rolls-Royce, a Jaguar or an Aston Martin meant the smell of Connolly hide. The London house finished leather for the motor trade, and its car hides had a name of their own: Vaumol. This is what Motor Sport saw when it went round the works in 1975, what Connolly says of its archive today, and what to ask before retrimming a classic.
By Royal Stitch · Published
Illustrative imageA house founded in 1878
Connolly tells its story like this: in 1878 the brothers John Joseph and Samuel Frederick Connolly opened one of London’s first while-you-wait shoe repair shops. They moved into harness and saddlery, began buying and finishing hides, and sold them to hood-makers and coachbuilders. When the coachbuilders turned to the motor car, the Connollys went with them.
By the firm’s account, its leather trimmed the first Rolls-Royce, Bentley, Ferrari, Maserati, Aston Martin, Jaguar and Morgan, and stayed the premium makers’ choice until the early 1990s, when it stepped back from mass original-equipment supply to concentrate on smaller commissions.
How a Vaumol hide was finished
In January 1975 Motor Sport went round the Wimbledon works. Connolly was a currier: the hides arrived tanned, were soaked, shaved to an even thickness and given a second tannage in great revolving drums. Then came stretching, which the piece calls critical: leave too much stretch and the upholstery bags and puddles after little use; too little and it can hardly be trimmed. Drying was gentle, because heat hardens the leather.
Next came colour, a base coat and a final finish, both sprayed, and finally back into the drums, dry this time, tumbling among brass and wooden knobs to restore suppleness and crush up the grain. Car hides treated this way were called Vaumol. Some, including part of Jaguar’s, were also given an antique finish, a contrasting dye swabbed over to bring out the grain.
The tanned hide
It arrives tanned; Connolly shaves, stretches and dries it.
Colour
A base coat and a finish, both sprayed.
Grain
Crushed up in the drum; some get a contrasting dye.
What the finish had to do
According to the article, Connolly had since 1927 a finish that made any colour possible, where hides had previously been limited to brown, tan, red, green and blue. The finish had to breathe, let the natural grain show, flex with use and be fairly waterproof. What it would not do was pure white: the finish was prone to early discolouration, and Connolly refused to offer it.
The same piece sets out what the house claimed for leather: it lets water vapour through, so it doesn’t turn hot and sticky, yet doesn’t readily take up liquid water, and looked after it lasts the life of the car.
Vaumol today
Today the name is carried by Connolly Brothers, run by the fourth generation of the family according to its website, which says its work is mainly bespoke hides and original hides for restoration. According to the firm, it makes Vaumol today with the same in-house processes as before, in a range of the most popular colours up to 1970 taken from the original recipes in its archive, which goes back to 1878. Other archive colours are available on request.
The firm also offers a Luxan version, with a second colour that lends depth to the grain, and has restarted the hide it developed in the late 1950s for Maserati alone, the leather of cars such as the Ghibli, Bora and Khamsin. That is the firm’s account; classic owners differ on whether today’s hide matches the period one, so it pays to see a sample beside the original trim before deciding.
Matching the original
Motor Sport explained in 1975 how a hide was matched: Connolly would make the new one to match the original if the customer sent a small sample or quoted the reference number of the seats. The same went for touch-up colour where the original had worn away.
The logic still holds for a classic that needs only part of its trim replaced: before anything is cut, find out what hide it wears and whether its colour sits in an archive.
What to ask before a retrim
With these answered, the new hide sits with the old:
- The original hide
- Is it Connolly? Is any piece in good enough order to serve as a sample?
- Colour
- Is there a reference? Is it in the maker’s archive?
- Finish
- Plain, or antiqued with a second tone in the grain?
- Keeping
- Can what is there be renovated rather than replaced?
- New panels
- How will they be matched to those that stay?
The service
A classic that wants its original hide?
Leather interiors for classic and sports cars on the Costa del Sol: seats, door cards, headlining and steering wheel. The service page explains how the work is done.
Sources
How the hides were finished comes from Motor Sport’s January 1975 visit to the works; the history of the house and today’s Vaumol come from Connolly itself, and are given as Connolly tells them. Each source was opened and read on the publisher’s own site.